Walking into a new home with no electricity is stressful, but the cause is often straightforward.
If you have no power at new house, start with three checks: look at the main switch, see whether neighbours also have power, and confirm that an electricity account was opened for your address.
Do not touch wiring, remove switchboard covers or attempt electrical repairs yourself. This guide shows what you can safely check, who to call and when a same-day connection may still be possible.
Market Overview: Key Insights 2026
- Same-day may still be possible: Jemena currently says eligible move-in requests received from the retailer before 3pm may be completed the same day within its Victorian network.
- After the cut-off, timing changes: Jemena says eligible requests received later are generally handled the following day.
- Long-disconnected properties need extra care: in Jemena’s Victorian network, a property without supply for more than 12 months may require a Certificate of Electrical Safety before reconnection.
- Smart meters can help: remote meter functions can make some reconnections simpler, although the result still depends on the distributor, meter and property.
- Safety comes first: repeated tripping, burnt smells, exposed wiring or visible damage need a licensed electrician, not repeated attempts at the switchboard.
Why Is There No Power at Your New House?
The most common explanations are that the main switch is off, no electricity account has been opened for the property, there is a local outage, or there is an electrical fault inside the home.
If there is no power at new house, work through the likely causes in a safe order rather than immediately assuming the connection failed.
| Possible Cause | How to Tell | What to Do |
|---|---|---|
| Main switch off | Main switch is in the off position | Turn it on if the switchboard appears safe, then test a light |
| No active account | Neighbours have power and your switches are on | Call a retailer or connection service |
| Local outage | Nearby homes or streetlights are also off | Check the distributor’s outage information |
| Fault in the home | A switch trips again, or there is visible damage or a burnt smell | Stop and call a licensed electrician |
If nearby properties are also without electricity, you are probably dealing with an outage, not a connection problem. Follow the steps for what to do in a power outage rather than opening another electricity account.
What Should You Check First?
Start with a few simple checks before assuming the electricity connection has failed. Check the switchboard only if it looks safe, then work out whether the problem affects only your property or the wider area.
If you have no electricity when moving in, check these points in order:
- Check the main switch. If the switchboard looks undamaged, make sure the main electricity switch has not simply been left in the off position.
- Check the safety switch. A tripped safety switch may sit in a different position from the other switches. If it will not reset or trips again, stop and call a licensed electrician.
- Check whether neighbours have power. If nearby homes or streetlights are also off, the problem is more likely to be a network outage than an issue with your electricity account.
- Confirm that an electricity account is active. If neighbouring homes have power and your switchboard appears normal, contact your retailer or connection service to confirm that the new-address account and connection request were completed.
- Look for obvious safety problems. Do not touch exposed wiring, damaged electrical equipment or a switchboard that looks burnt, wet or damaged.
- Do not keep resetting a switch that trips. Repeated tripping can indicate a fault inside the property and needs professional investigation.
No Power? Work Out Who Needs to Fix It
A quick comparison can help separate a connection problem from an outage or an electrical fault inside the home.
Neighbours have power
Your home does not
Likely issue: account, main switch, meter or property fault.
Neighbours also have no power
More than one property is affected
Likely issue: local network outage. Check your distributor’s outage information.
Switch trips or damage is visible
The problem may be inside the property
Likely issue: electrical fault. Stop and call a licensed electrician.
Quick rule: if several nearby properties are off, check for an outage. If only your home is off, check the switchboard and account. If anything looks damaged or keeps tripping, stop and call an electrician.
Energy Safe Victoria advises against attempting electrical repairs yourself. If a safety switch will not reset, circuit breakers keep turning off or electrical equipment looks damaged, use a licensed electrician. Energy Safe Victoria’s power outage guidance also recommends contacting the electricity supply company when the problem is on the network.
Renters should contact the property manager or landlord if the switchboard is locked, damaged or appears unsafe.

Who Do You Call When a New Home Has No Electricity?
Call your electricity retailer for a connection issue. Call the distributor when there is a network outage or fault. Call a licensed electrician when the problem appears to be inside the home.
If you have not chosen a retailer yet, a connection service can help organise the new account and send the request through the relevant retailer and distributor.
For an urgent electricity connection, have these details ready:
Full property address. Include the unit number where applicable.
Your move-in date. This helps establish when the new account should begin.
Photo ID. Have identification ready so the account can be checked and opened without unnecessary delay.
You normally deal with the retailer for a connection. The retailer then sends the request to the local distributor.
Call the distributor directly when the issue is an outage, network fault or electricity emergency.
If the property also needs gas, you can connect electricity and gas together rather than making separate arrangements after discovering both services are off.
Need Power Today?
Call early so the address, meter and distributor cut-off can be checked while same-day options may still be available.
How Quickly Can the Power Be Connected?
Same-day reconnection may be possible at some properties, particularly where a compatible smart meter allows remote work, but timing depends on the distributor, meter, property and daily cut-off.
A same day power connection is not guaranteed simply because the request is made online or by phone. The retailer still needs to send the request to the distributor in time.
For a current Victorian example, Jemena says an eligible move-in request received from the retailer before 3pm can generally be handled the same day in its network. Requests received later are generally handled the following day.
Important: the 3pm example is specific to Jemena’s Victorian electricity network. Other distributors can have different cut-offs, meter requirements and urgent-service rules.
A smart meter can make reconnection faster at eligible properties because some services can be restored remotely instead of requiring a site visit.
If you are close to the deadline, check how same-day connections work before assuming the request can still be completed today.
Cut-offs vary between networks, so check today’s connection cut-off in your state when an urgent booking depends on a specific deadline.
An urgent or same-day fee may also apply. Ask what the charge is before agreeing to the request.
When Do You Need an Electrician?
You need an electrician when switches repeatedly trip, there is visible electrical damage, wiring is exposed, you notice a burnt smell or a distributor requires electrical safety work before reconnection.
Use this table to decide who should handle the problem.
| Situation | Who to Call | Why |
|---|---|---|
| No account opened | Retailer or connection service | An electricity account needs to be established |
| Whole street has no power | Distributor faults line | The issue is likely to be on the electricity network |
| Switches keep tripping | Licensed electrician | There may be a fault inside the property |
| Burnt smell, exposed wiring or visible damage | Licensed electrician, or emergency services if there is immediate danger | Electrical safety comes first |
| Damaged switchboard in a rental | Agent or landlord | Property repairs are generally an owner responsibility |
The length of time the property has been disconnected can also matter. Jemena says a property in its Victorian network that has been without supply for more than 12 months may require a Certificate of Electrical Safety before reconnection. This is a distributor-specific requirement, not a national 12-month rule.
If you are moving within Victoria, check the local requirements for Victorian electricity connections rather than assuming the same reconnection rules apply everywhere.
Renters should contact the agent or landlord first if the electrical installation appears damaged. The guide to connecting utilities in a rental explains the account side separately from repairs to the property.

How Do You Get Electricity Connected Today?
Have the exact address, move-in date and photo ID ready, then call as early as possible and ask whether the distributor’s same-day cut-off is still open.
If you still have no power at new house and neighbouring properties have electricity, do not spend hours waiting to see whether the supply appears by itself.
To get electricity connected today:
Confirm the exact property address. Include the correct unit number if applicable.
Have your move-in date and ID ready. These details help the retailer establish the account.
Call early. Ask whether today’s local distributor cut-off is still open.
Confirm any urgent fee. Ask what you will be charged before approving the urgent request.
Once your details are ready, you can get your electricity connected and have the connection request submitted for the property.
For a fuller preparation checklist, see what you need to book an electricity and gas connection before calling.
For Melbourne VIC, smart-meter reconnections can often be completed remotely where the meter and property are eligible. In Sydney NSW, Brisbane QLD and Adelaide SA, cut-offs and site requirements depend on the local network, so confirm the timing for the address before relying on same-day service.
Our Melbourne connections team is based at Level 2, 134 Flinders Street, Melbourne. You can read reviews of our Melbourne connections team on Google Maps.
No Power? Check First, Then Call Early
Start with the main switch. Then check whether neighbouring properties have power. If they do, confirm whether an account has been opened for your new address.
Do not attempt electrical repairs yourself. If there is visible damage, repeated tripping, exposed wiring or a burnt smell, call a licensed electrician.
If the issue is simply that the property was not connected for your move, calling earlier gives you a better chance of getting the request through before the distributor’s daily cut-off. For an urgent connection, contact Move-in Connect.
Moved in and Still Have No Power?
Check the main switch and nearby properties first. If the problem is the connection, call early so today’s options can be checked.
Frequently Asked Questions
Why Is the Electricity Off in My New House?
Common reasons include the main switch being off, no account being opened for the address, a local outage or an electrical fault inside the property. Check these possibilities in a safe order before assuming the connection failed.
Can I Turn the Main Switch On Myself?
If the switchboard appears undamaged and safe, you can check whether the main switch has been left off. If a switch trips again immediately, or you notice damage, exposed wiring or a burnt smell, stop and call a licensed electrician.
How Long Does an Urgent Electricity Connection Take?
Same-day connection may be possible at some addresses when the retailer submits the request before the local distributor’s cut-off. Timing depends on the meter, distributor, property and whether additional work is required.
Do I Call the Distributor or the Retailer?
Call the retailer for a new account or reconnection request. Call the distributor directly for a network outage, network fault or electricity emergency.
Will I Be Charged for an Urgent Connection?
An urgent or same-day fee may apply depending on the distributor and service required. Ask the retailer or connection service to confirm the charge before agreeing to the request.
Sources and further reading
Where the facts in this electricity guide come from.
- Energy Safe Victoria: What to do in a power outageCited in the text above.
- Jemena: Moving home or premisesCited in the text above.
Was this guide useful?
Thanks for letting us know.




