Mon–Fri 9am–9pm, Sat 11:30am–5pm (AEST)Free connection service 1300 786 045

Energy

What Do You Need to Connect Electricity and Gas?

A connection booking can take minutes when the right information is ready, but a missing address detail, ID or meter number can quickly slow things down.

What Do You Need to Connect Electricity and Gas?
On This Page
  1. What Do You Need to Connect Electricity and Gas?
  2. What ID Do You Need to Open an Energy Account?
  3. Do You Need the NMI and MIRN to Get Connected?
  4. What Extra Details Do Renters and Buyers Need?
  5. What Should You Tell the Retailer About Concessions and Life Support?
  6. How Do You Avoid Delays Once You Have Everything?
  7. Have Your Details Ready Before You Book
  8. Ready to Connect Electricity and Gas?
  9. Frequently Asked Questions

A connection booking can take minutes when the right information is ready, but a missing address detail, ID or meter number can quickly slow things down.

If you are wondering what do you need to connect electricity and gas, start with four essentials: your full new address, confirmed move-in date, contact details and photo ID. Meter numbers, concession information and life support details are added where relevant.

This checklist shows exactly what to prepare before arranging electricity and gas at your new home.

Market Overview: Key Insights 2026

  • Have four basics ready: full address, move-in date, contact details and photo ID.
  • Meter numbers help, but are not always essential: an NMI or MIRN can usually be located from the property address.
  • Check the unit number carefully: apartments and multi-unit properties have a higher risk of matching the wrong meter.
  • Life support must be declared: the AER reported 228,718 registered life-support electricity customers, or 3.3% of residential customers, in late 2025.
  • Medical confirmation matters: the AER reported that 69% of registered life-support customers had supplied medical confirmation.

What Do You Need to Connect Electricity and Gas?

To connect electricity and gas you need the full new address, your move-in date, your name and contact details, and one form of photo ID. Meter numbers, concession details and life support needs are added where they apply.

The table below shows what to have ready before you make the booking.

Item Needed? Where to Find It
Full new address, including unit number Always Lease or contract of sale
Move-in date Always Lease start or settlement date
Name, phone and email Always Your personal details
Photo ID Always Driver licence, passport or Medicare card
NMI for electricity Helpful Meter or previous bill
MIRN or DPI for gas Helpful Gas meter or previous bill
Concession card details If you hold one Your concession card
Life support details If anyone relies on equipment Medical confirmation from your doctor

Most existing-home bookings do not require a long list of documents. The biggest priorities are identifying the correct property, knowing when you take possession and confirming who will hold the account.

What ID Do You Need to Open an Energy Account?

Retailers ask for one form of photo identification, usually a driver licence, passport or Medicare card, so they can confirm who is responsible for the account and run any required checks.

The exact proof of identity for electricity account requirements can vary by retailer, but commonly accepted identification includes:

  • Australian driver licence
  • Passport
  • Medicare card
  • Other government-issued identification accepted by the retailer

A passport can also be useful for people who have recently arrived in Australia and do not yet have an Australian driver licence.

Once your identification and move details are ready, you can connect electricity at your new address without having to organise the physical network work yourself.

Some retailers may also perform a credit check when opening an account. If that matters to you, ask about it before agreeing to the plan.

Get electricity and gas connected at a new address with Move-in Connect

Do You Need the NMI and MIRN to Get Connected?

Not usually. An NMI or MIRN makes a booking faster and more accurate, but at an existing home the retailer can normally find both from the street address.

Your NMI, or National Metering Identifier, identifies the electricity connection point. Gas usually uses a MIRN, while NSW gas customers may see a DPI instead.

If you are unfamiliar with these numbers, this guide explains what an NMI, MIRN or DPI is and where each identifier can be found.

You can generally connect electricity without a bill from the previous occupant. The retailer can search for the supply point using the property address and your account details.

Apartment tip: Check the unit number carefully and, where possible, confirm that the meter serial number matches your property before the request is submitted.

The meter serial number is different from the NMI. Understanding how your electricity meter works can help you identify the correct meter, particularly where several meters sit together in the same cabinet.

What Extra Details Do Renters and Buyers Need?

Renters should have the lease start date and know whether any utilities are included in the rent. Buyers should have the settlement date, because the account cannot start before they legally take possession.

For renters, the details needed to set up electricity normally include the full rental address, unit number and lease start date. Under a standard residential lease, Australian Government moving guidance says it is generally the tenant’s responsibility to sign up with a gas and electricity retailer.

Apartment renters should also ask whether the building operates through an embedded network before choosing a retailer. If you are moving into a rental, the rental electricity and gas connection guide explains what to check before arranging supply.

Buyers should use the settlement date as their starting point and make sure the supply address exactly matches the property purchased. The contract of sale can help if the retailer needs clarification.

For Melbourne VIC renters and buyers, smart meters are common, but the correct address and meter still matter. Reviewing connections in Victoria can help you understand how electricity and gas are arranged after a move.

What Should You Tell the Retailer About Concessions and Life Support?

Tell the retailer straight away if anyone at the new address relies on life support equipment or holds a concession card, because both are tied to the account and must be set up again when you move.

Life support information should never be treated as an optional detail to sort out later.

Registered Life-Support Electricity Customers Are Increasing

AER retail performance data shows an increase in registered electricity customers requiring life-support equipment between late 2025 and March 2026.

Registered customers
250k
200k
150k
100k
50k
0
228,718
3.3%
237,802
3.4%
Oct to Dec 2025
Jan to Mar 2026
AER reporting period

Increase: Registered life-support electricity customers rose by 9,084 between the two reported quarters, while the share increased from 3.3% to 3.4%.

Reporting Period Registered Customers Share
Oct to Dec 2025 228,718 3.3%
Jan to Mar 2026 237,802 3.4%

Sources: Australian Energy Regulator, Oct to Dec 2025 retail performance report and Australian Energy Regulator, Jan to Mar 2026 retail performance update
.

Under the AER’s life support registration requirements, retailers and distributors have responsibilities for registering and maintaining records for premises where a customer relies on eligible life support equipment.

If anyone in your household relies on this equipment, tell the retailer as soon as the new account is being arranged and ask what medical confirmation is required. The guide to life support and moving house explains the moving process in more detail.

If you hold a concession card, provide the card details when opening the new account. Do not assume a concession attached to the old address will automatically move to the new account.

Concession eligibility and amounts differ between states, so the retailer should confirm what applies at your new address.

How Do You Avoid Delays Once You Have Everything?

Allow several business days before move-in, make sure the meters can be reached and double-check the full address and unit number before submitting the request. Small address errors can delay an otherwise straightforward connection.

As a planning buffer, allow at least three business days for electricity and around five for gas where possible. Actual timing depends on the retailer, distributor, meter and property, so these are planning allowances rather than guaranteed connection times.

Once your move-in date is confirmed, you can book your electricity and gas connection instead of leaving both services until the final day.

Meter access also matters. Make sure gates, locked cupboards, pets or building-access arrangements will not stop a technician reaching the meter if a site visit is required.

One detail deserves an extra check in apartments: the exact unit number. Similar addresses and groups of meters can make a wrong-property request harder to spot before the connection is processed.

When asking what do you need to connect electricity and gas, the simplest answer is: get the address, date and ID right first, then add the meter and account-specific details that apply to your household.

For the full booking sequence after your documents are ready, follow the step-by-step guide to connecting electricity and gas.

Our Melbourne connections team is based at Level 2, 134 Flinders Street, Melbourne VIC 3000. You can also read reviews of our Melbourne connections team on Google Maps.

Arrange electricity and gas connections before moving into a new home

Have Your Details Ready Before You Book

For most existing homes, the essential information is simple: the correct address, confirmed move-in date, contact details and identification. Add your NMI or MIRN if available, plus concession or life support information where relevant.

Checking the unit number and preparing everything before you book can prevent avoidable delays.

When your details are ready, Move-in Connect can help arrange electricity and gas for your new address.

Ready to Connect Electricity and Gas?

Have your address, move-in date, contact details and ID ready, then arrange both services for your new home in one place.

Connect Electricity and Gas

Frequently Asked Questions

Can I Connect Electricity Without a Previous Bill?

Yes. A previous bill is not required. The retailer can identify the property from the address and confirm your identity with photo ID.

Do I Need Proof of Address to Connect Electricity?

Usually not as a separate document. The retailer needs the full address and move-in date, although some may ask for lease or settlement details if the property information is unclear.

Can Someone Else Book the Connection for Me?

Yes, with your permission. A partner, family member or connection service can book on your behalf, but the account holder must be identified and agree to the plan.

What If I Do Not Know My NMI?

You can still book. The NMI can usually be found from the property address, and it may also appear on the electricity meter or a previous bill.

Do I Need a Credit Check to Connect Electricity?

Some retailers run a credit check when opening an account. Ask the retailer or connection service before agreeing to a plan if this is important to you.

Sources and further reading

Where the facts in this energy guide come from.

  1. AER: October–December 2025 retail performance reportCited in the text above.
  2. Energy Made Easy: Moving house or businessCited in the text above.
  3. AER: Retail energy market performance update, January–March 2026Cited in the text above.
  4. AER: Life support registration guideCited in the text above.

Was this guide useful?

CallConnect now