Mon–Fri 9am–9pm, Sat 11:30am–5pm (AEST)Free connection service 1300 786 045

Electricity

Who Is My Electricity Distributor? A State-by-State Guide

Your electricity bill can show two different energy companies, even though you only remember choosing one of them.

Who Is My Electricity Distributor? A State-by-State Guide
On This Page
  1. What Is an Electricity Distributor?
  2. Which Distributors Operate in Each State?
  3. How Do You Find the Distributor for an Address?
  4. What Is the Difference Between a Distributor and a Retailer?
  5. Why Does the Distributor Matter When You Move?
  6. Who Do You Call: The Distributor or the Retailer?
  7. Know the Network Before Moving Day
  8. Moving to a New Address?
  9. Frequently Asked Questions

Your electricity bill can show two different energy companies, even though you only remember choosing one of them.

If you are asking who is my electricity distributor, the answer is determined by the address, not the electricity plan you choose. Your distributor owns the local network that physically carries electricity to the property, while your retailer sells the electricity and sends the bill.

For movers, knowing the difference matters because the distributor can affect connection timing, urgent cut-offs, fees and who you contact when the power goes out.

Market Overview: Key Insights 2026

  • 5 main networks serve Victoria: CitiPower, Powercor, AusNet, Jemena and United Energy.
  • 3 main distributors cover New South Wales: Ausgrid, Endeavour Energy and Essential Energy.
  • Queensland has 2 major networks: Energex covers south-east Queensland and Ergon Energy covers much of regional Queensland. Essential Energy also serves parts of southern regional Queensland.
  • 1 main network serves most of South Australia: SA Power Networks is the principal electricity distributor.
  • Your distributor is fixed by the address: you can change electricity retailers, but you cannot choose another local electricity network for the same property.

What Is an Electricity Distributor?

An electricity distributor owns and maintains the poles, wires and local network that deliver electricity to your home. The distributor does not sell you an electricity plan. Your retailer manages the account and sends the bill.

So when you ask who is my electricity distributor, think about the company responsible for the physical poles and wires, not the company whose logo appears at the top of your energy bill.

The distributor operates the network in a defined geographic area. You generally cannot choose or change that network without moving to a property served by another distributor.

find-your-electricity-distributor-and-connect-your-new-address

Which Distributors Operate in Each State?

Victoria has five main electricity distributors, New South Wales three and Queensland two major networks, while South Australia and Tasmania each have one principal distributor. Your exact address determines which network serves you.

The table below shows the principal electricity distribution networks relevant to movers.

* Note: Essential Energy also serves a small number of Victorian customers. Some remote electricity systems may be operated separately.

Electricity Distributor
Map of Australia

The map shows the principal electricity distribution networks by state and territory. Your actual distributor depends on the full property address.

Map of Australia showing the main electricity distributor in each state and territory
WESTERN AUSTRALIA
• Western Power
• Horizon Power
NORTHERN TERRITORY
• Power and Water Corporation
QUEENSLAND
• Energex (south-east QLD)
• Ergon Energy (regional QLD)
NEW SOUTH WALES
• Ausgrid
• Endeavour Energy
• Essential Energy
ACT
• Evoenergy
SOUTH AUSTRALIA
• SA Power Networks
VICTORIA
• CitiPower
• Powercor
• AusNet Services
• Jemena
• United Energy
TASMANIA
• TasNetworks

The map shows the principal (main) distribution networks in each state and territory. Essential Energy also serves a small number of customers in Queensland, Victoria and the ACT. These exceptions are listed in the table below.

State/Territory Electricity Distribution Network Provider (DNSP) Area Serviced
QLD Energex Brisbane, Gold Coast, Sunshine Coast and south-east Queensland
QLD Ergon Energy Regional and rural Queensland
QLD Essential Energy limited customers Parts of southern regional Queensland (limited customers; main network is in NSW)
NT Power and Water Corporation Northern Territory
NSW Ausgrid Inner, northern and eastern Sydney and nearby areas
NSW Endeavour Energy Greater western Sydney, Blue Mountains, Southern Highlands and Illawarra
NSW Essential Energy Regional NSW and parts of southern regional Queensland
ACT Evoenergy Australian Capital Territory
ACT Essential Energy limited customers Some customers in the ACT (Evoenergy is the main network)
VIC CitiPower Melbourne CBD and inner suburbs
VIC Powercor Western Melbourne and western Victoria
VIC AusNet Services Eastern and north-eastern Victoria
VIC Jemena Northern and north-western Melbourne
VIC United Energy South-eastern Melbourne and Mornington Peninsula
VIC Essential Energy limited customers Limited customers only (the five networks above are the main Victorian distributors)
SA SA Power Networks South Australia
TAS TasNetworks Tasmania
WA Western Power Perth, south-west WA and interconnected areas
WA Horizon Power Regional and remote Western Australia

For movers: use this map as a guide only. Your actual distributor is determined by the full property address and network connection point, so confirm it from the electricity bill, retailer or official distributor lookup before relying on a network name.

Map outlines: Australia map by Lokal_Profil via Wikimedia Commons, adapted in the @svg-maps/australia package, licensed CC BY-SA 4.0. Distributor labels adapted for this Move-in Connect guide.

Victoria

Victoria has five main distribution businesses, each covering a different geographic area. Melbourne alone spans several network zones, so the suburb and exact address matter.

If you are moving within the state, the guide to energy connections in Victoria explains the local connection process as well as the network side.

New South Wales

New South Wales is divided mainly between Ausgrid, Endeavour Energy and Essential Energy. Ausgrid covers much of Sydney, the Central Coast and Hunter, Endeavour covers Greater Western Sydney and surrounding areas, and Essential Energy covers much of regional NSW.

Movers can review the wider process for electricity in NSW before choosing a retail plan or booking the new address.

Queensland

Queensland is primarily divided between Energex in Brisbane, the Gold Coast, Sunshine Coast and surrounding south-east areas, and Ergon Energy across much of regional Queensland. Essential Energy also serves parts of southern regional Queensland.

South Australia

South Australia is simpler for most households because SA Power Networks is the principal electricity distributor across the state.

ACT

In the ACT, Evoenergy is the main electricity distributor, although Essential Energy also serves some customers.

Tasmania

Tasmania has one principal electricity distributor: TasNetworks.

How Do You Find the Distributor for an Address?

Check an electricity bill for the property, use the Australian Energy Regulator’s distributor directory or ask a retailer to identify the network from the exact address.

If you need to find my electricity distributor, use these three checks:


  1. Look at an electricity bill. The distributor or network name and its faults line are normally shown on the bill.

  2. Check the official directory. The Australian Energy Regulator lists electricity distribution networks and their service areas.

  3. Ask the retailer to check the address. A retailer can identify the connection point and associated network when setting up the account.

Your NMI, or National Metering Identifier, can help identify the exact electricity connection point. This is particularly useful where network boundaries run close together or a suburb spans more than one distribution area.

For example, somebody arranging electricity in South Australia will usually find SA Power Networks attached to the property, while a Victorian address may need a more precise network check.

Melbourne is especially important because several distribution zones meet across the metropolitan area. Once the dedicated guide is live, readers can use Melbourne distributors by suburb to narrow the network down further.

Do not rely only on the postcode if the property is close to a network boundary. The full address or NMI provides a more reliable match.

What Is the Difference Between a Distributor and a Retailer?

The retailer sells you a plan, sends the bill and takes your connection booking. The distributor operates the local network, handles network outages and carries out network-side work. You choose the retailer, not the distributor.

This table shows the practical distributor vs retailer difference.

Job Retailer Distributor
Sells the plan and sends the bill Yes No
Takes your connection booking Yes No
Arranges supply to be switched on Submits the request Carries out required network action
Handles network outages No Yes
Can you choose them? Yes No

The distinction is important when you move.

Your retailer deals with your account and submits the connection request. The distributor then handles the network-side work associated with that request.

The same principle applies to the meter. Depending on the issue, your retailer may be the first contact for account or metering questions, while the distributor deals with network infrastructure and outages.

You can change electricity retailers without changing the distributor because the physical network serving the property remains the same.

connect-electricity-at-your-new-address-after-checking-your-distributor

Why Does the Distributor Matter When You Move?

Your distributor can affect connection fees, same-day cut-offs and whether network work is required, so two homes on different networks can have different moving-day arrangements.

That is why identifying the electricity network provider matters before an urgent move.

For example, one Melbourne address may be in CitiPower’s network while another is served by Jemena or United Energy. Even if both households choose the same retailer, network procedures and charges can differ.

The connection fee can also be linked to the network. The retailer may pass through the applicable network charge rather than applying one identical national connection fee.

Queensland provides another clear example. Energex and Ergon Energy cover different parts of the state, so people arranging electricity in Queensland can face different network arrangements depending on the address.

Timing matters too. A retailer may accept the booking, but whether an urgent request can still be completed that day can depend on the distributor’s deadline and property requirements.

If you are booking close to moving day, check the relevant connection cut-off times by state rather than assuming one deadline applies across Australia.

This is why asking only “Which retailer should I choose?” misses part of the moving process. The retailer determines the plan, while the network affects important parts of how the physical connection is handled.

Who Do You Call: The Distributor or the Retailer?

Call the retailer to connect or disconnect electricity and discuss your account or bill. Call the distributor for a network outage, fallen powerlines or another problem with the local electricity network.

If you are still asking who is my electricity distributor, checking before moving day saves time because you will already know who operates the network if something goes wrong.

For a normal move, start with the retailer. Once the new address and move-in date are confirmed, you can book your electricity connection and the retailer will submit the relevant request to the network.

If the entire street loses power, contacting the retailer usually will not fix the network fault. The distributor is responsible for network outage information and restoration.

The Australian Energy Regulator advises consumers to contact the distributor about electricity outages, powerlines and other network-supply problems, while the retailer handles accounts, plans and connection arrangements.

If the power is already out, use the guide on what to do in a power outage to work out whether you need the distributor, retailer or emergency services.

Households with registered life-support equipment should also save their distributor’s faults number before they need it.

Our Melbourne connections team is based at Level 2, 134 Flinders Street, Melbourne. You can read reviews of our Melbourne connections team on Google Maps.

Know the Network Before Moving Day

Your electricity distributor comes with the address. Your retailer is the company you choose.

Knowing the distributor helps you understand who physically handles network work, where network connection charges can come from, which urgent cut-offs may apply and who to call if the neighbourhood loses power.

Find the network first, choose the retailer and then arrange the connection for your move-in date.

To have the electricity booking arranged for your new address, speak to Move-in Connect.

Moving to a New Address?

Your distributor is fixed by the property, but you can still choose your electricity retailer and arrange the connection for your move-in date.

Connect Electricity at My New Address

Frequently Asked Questions

How Do I Find Out Who My Electricity Distributor Is?

Check an electricity bill for the property, use the Australian Energy Regulator’s distributor directory or ask a retailer to identify the network from the exact address.

Can I Change My Electricity Distributor?

No. Your distributor is determined by the network serving the property. You can choose or switch electricity retailers, but you cannot select another local distribution network for the same address.

Is My Distributor the Same as My Retailer?

No. Your retailer sells the electricity plan and sends the bill. The distributor owns and operates the local electricity network that physically delivers power to the property.

Who Do I Call in a Blackout?

Call your electricity distributor’s faults line for a network blackout. The distributor’s name and emergency contact details are normally printed on the electricity bill.

Does the Distributor Connect My Power When I Move?

The retailer takes the booking and sends the relevant request to the electricity network. The distributor then handles any network-side connection work required for the property.

Sources and further reading

Where the facts in this electricity guide come from.

  1. CC BY-SA 4.0Cited in the text above.

Was this guide useful?

CallConnect now